缝隙式挡土墙模具—缝隙式挡墙模具形状特点-模具博客
缝隙式挡土墙模具—缝隙式挡墙模具形状特点
本文作者:hongxumoju000  发布时间:2020-04-06  来源:原创         转载到我的博客


缝隙式挡土墙模具—缝隙式挡墙模具形状特点

河北宏旭模具15027863218

缝隙式挡土墙模具的设计之复杂是其他模具无法相比的,因为缝隙式挡土墙模具采用的结构就是内部空心,而且伴随的是两个箱型结构,而且外部多有孔以及侧壁复杂的结构,使得模板生产上技术要求非常的严格。在缝隙式挡土墙模具的展示效果中,有很多是通过研究我厂生产的模具后进行改进或者重新编排的,因为在缝隙式挡土墙模具的生产上,具总是提前依据客户需要的图纸生产好模具,而且模具在应用起来非常简单、便利,制作出来的挡墙预制块外形美观,使用效果好,这完全是参照图纸生产的,重点在于我厂技术人员对于图纸的理解。



The design of the slit type retaining wall mould is more complex than that of other moulds, because the structure of the slit type retaining wall mould is hollow inside, and it is accompanied by two box type structures, and there are many holes on the outside and complicated side wall structure, which makes the technical requirements of the formwork production very strict. In the display effect of the slit type retaining wall mold, many of them are improved or rearranged after studying the mold produced by our factory, because in the production of the slit type retaining wall mold, the mold is always produced in advance according to the drawings required by the customers, and the mold is very simple and convenient in application, and the prefabricated block of the retaining wall is beautiful in appearance and use effect Well, it's all produced by referring to the drawings, and the key point lies in the understanding of the technical personnel of our factory for the drawings.

相关文章
文章点评: