浇筑式防撞墙模具使用说明

宏旭模具浇筑式防撞墙模具的使用方法主要集中在对于现场浇筑方式生产的模板，按照防撞墙模具结构样式的划分，对于浇筑式防撞墙的生产需要两片组合在一起，而固定两片模板的工具则为普通的拉杆，而栏杆数量设置多少直接与模板的长度有关系，在模具使用的时候要注意连接的紧密性。防撞墙模具的使用方法是按照两片组合式的结构进行现场浇筑完成对混凝土防撞墙的生产任务，所以防撞墙模具的定义为通过钢模板的焊接，将两片模板通过拉杆以及螺丝进行固定，在这种定义下，制作的防撞墙模板可以有效的保证每个工程的顺利使用。防撞墙模具应用方式的形成是长时间在公路使用该模板形成的制作模式，因为采取现场浇筑的模式可以节省二次搬运的时间，这样就有效的提高了工作效率。在防撞墙模具的定义中，有些地方称之为防撞护栏，其本质含义都是一样的。在混凝土防撞墙制作效果上，有些固定方式不同，厂家生产的模具都是上面伸出来拉杆的固定模式，而一些地方上面要求做平的，直接使用钢筋固定。还有一些细节问题需要注意，比如长度的设置，往往1米的比较多，方便搬运和拆卸。The use method of the cast-in-place anti-collision wall mold of Hongxu mold is mainly focused on the formwork produced by the cast-in-place method. According to the division of the structural style of the anti-collision wall mold, the production of the cast-in-place anti-collision wall requires two pieces to be combined, while the tools for fixing the two pieces of formwork are ordinary pull rods, and the number of railings is directly related to the length of the formwork Pay attention to the tightness of the connection when using. The use of the anti-collision wall mold is to complete the production task of the concrete anti-collision wall according to the on-site pouring of two pieces of combined structure, so the definition of the anti-collision wall mold is to weld the steel formwork, and fix the two pieces of formwork through the pull rod and screw. Under this definition, the anti-collision wall template can effectively ensure the smooth use of each project. The application mode of the anti-collision wall mold is the production mode formed by using the template on the road for a long time, because the mode of on-site pouring can save the time of secondary handling, which effectively improves the working efficiency. In the definition of anti-collision wall mold, some places call it anti-collision guardrail, its essential meaning is the same. In the production effect of concrete anti-collision wall, some fixing methods are different. The molds produced by the manufacturer are all fixed by the pull rod protruding from the top. In some places, it is required to be flat and fixed directly with steel bars. There are also some details to be noted, such as the length of the setting, often more than 1 meter, convenient for handling and disassembly.